Let's get this Party Started

[MRigney]

Ok, Let's Get this Forum Going.............

What kind of Cars do you people drive.

Cobra's , GT's , V6...Let me know..

Post a pick if you want....

Tell us about it.

[warlockpain]

SO TELL ME WHAT I NEED TO CHANGE.I DON'T LIKE THE CHEESY FLAMES.I THOUGHT ABOUT SOLID PEARL WHITE.WHAT DO YA THINK?
OH BY THE WAY,THE CAR IS A 91 SSP (INTERCEPTOR) 5.O ,5 SPEED

[Trojan Horse]

1986 Mustang GT w/ a Keith Craft 306 and lots of mods. Still working on it.

[Justa6]

http://image1ex.villagephotos.com/pubimage.asp?id_=932461

http://image1ex.villagephotos.com/pubimage.asp?id_=932470

http://www.coloradostangs.com/sigs/justa6_banner.jpg
2000 Crystal White 5spd Mustang V6
Cosmetic Mods:
GT Fog Lights
GT/Cobra Rear Bumper
'99 SVT Cobra Rims
Ford Blue Brake Calipers
Custom Sound System
Billett Grille
Black Bumper Inserts
Window Tinting
Headlight Blackouts
Performance Mods:
MAC Cold Air Intake
Custom Dual Exhaust
B&M "Ripper" Shifter

[stangman98]

1998 GT that is in the process of becoming an 11 sec 2V mod motor car.:cool:

[H.T.'s83]

'83 G.T. , all stock , including the 4-speed! Future plans include:

306 roller motor, still carbed. ( what can I say, I'm old-school)

tremec 3550

8.8" 3:73 rear

subframes

K-member

rollcage

5-lug upgrade

general interior restoration

[Justang_87]

just a 87 gt that has the typical bolt ons....but i did restore my interior....ill post a pic soon

[Ken Roush]

As of now I drive a 93 gt

Vortech A-trim

The Nitrous Works dry kit 100 hp

Adj. Koni's in frt Edelbrock IAS in back

Frame tied...pro 5.0 shifter....MSD w/coil

Racing seats...255 in tank.....3:55 gears

97 cobra front suspension..13 in. rotors cobra calipers

5-lug rear with 97 cobra 17 in. rims....all 4 corners

regular stuff..pullies.....exhaust...gauges.....yada,yada

[jeffs01]

I HAVE 2:D The 2001 GT is in my Sig. I also have interior cosmetics by www.mgwltd.com all are satin finish to match my Silver paint. The other is a 2002 GT, Lazer Red. Interior is chrome billet from the same company. Only a few mods, Mac CAI, Hypertech Chip and 2 chamber Flowmasters. The 2002 is going to be our little show car eventually.:D

[Fordgasm]

'89 hatch - slow
stock 302/T5
BBK shorty headers, Bassani catted X, Flowmasters, BBK adj. clutch quadrant & cable, FRPP 9mm wires, Pro 5.0 shifter

'95 GT coupe - not slow
333 cid, mexican block, JE 11:1 pistons, Eagle 4340 crank & H beams, FPS main stud girdle, canton oil pan & windage tray, Romac balancer, stage III TFS heads, FRPP 1.6 rockers, F303 cam, Performer RPM intake, TFS 1 inch spacer, FRPP 30# inj., walbro 255 LPH fuel pump, BBK adj. FPR, BBK 70mm TB, lightning 80mm MAM, Mac CAI, K&N, MSD 6AL, MSD dist., MSD TFI coil, FRPP 9mm wires, BBK ceramic longtubes, BBK o/r h pipe, Magnaflow catback, energry suspension motor mounts, Fluidyne, stewart H.V. H20 pump, BBK underdrive pulleys, FRPP 3.73's, FRPP aluminum driveshaft, Tremec 3550, Fidanza aluminum flywheel, FRPP HD pressure plate, McLeod friction disk, Pro 5.0 shifter, UPR clutch quadrant/firewall adj/ clutch cable, energy suspension tranny mount, FRPP A/C delete, SS brake lines, autologic chip tuned by Swanson Performance, FRPP "C" springs, Bilsteins, Hotchkis C/C plates, BBK subframes, SSM front swaybar, cobra rear swaybar, H&R 30mm wheel spacers, ARP bolts throughout....etc....

soon to be installed: MM K member, A arms, coilovers, C/C plates, LCAs, bumpsteer kit, baer brakes, Dr. Gas X pipe, FR solid steering shaft, and rippin out the F cam for a custom grind

[93 red snake]

93 cobra with more mods than i care to remember $$$$$$$$$$$

[teal93LX]

:( I drive a 93 LX 4 cylinder! If anyone is selling a 5.0 that is in descent condition in PA let me know!