5literbeater
05-31-03, 07:13 PM
Here's the deal, I had an oil leak because of my lower intake gasket leaking. So, I yanked off the upper+lower intake and the distributer, replaced all the lower intake gaskets, and put the distributer back in. Now, it doesn't want to start, and when it breifly will, it dies almost immediatly unless you give it gas. Checked for TDC on #1 cyl. and set rotor accordingly, but it doesn't work!! Checked for 180* out, but seems not to be. Reversed 180* to check, but then wouldn't even start at all. Prior to yanking the distributer, all was well except for the oil leak. PLEASE, ANY ideas would be helpfull!! What should I do now??